The Power of Water

50% more production than our competition

Put your assets back in service faster.

Call us today to get started.
Call Now

Allstream Services

UHP Hydroblasting and Robotic System

  • Remove coatings in an environmentally friendly manner.
  • Is 100% contained. Removes all coating, rust, water, contaminants and sends through a filteration system for proper disposal. NO Air Contaminants.
  • Is in 100% compliance with Environmental regulations.
  • Is 100% proven with multiple coating systems.
  • Requires less personnel and equipment than conventional blasting.
  • Higher production rate vs. conventional blasting.
  • Offshore Ready.
  • Once robot prepares surface for coating, you can apply coatings the same day. There is no shutdown to clean up and blow down.
  • Can operate Vertically, Upside Down, or on Flat Surfaces flawlessly due to an upgraded Vac System.
  • Painters and other trades can work side-by-side as our equipment is operating so you can complete your jobs more quickly!

Certified UHP Unit Training

Allstream offers Factory Training for UHP Husky Pumps and A-3000 Hand Lancing. Our training course is taught by a Flow certified instructor with Flow training materials. Receive classroom instruction and hands-on training with the equipment that will actually be used in the field. Our extensive training will provide students with the knowledge to operate Allstream UHP Pumps and A-3000 Hand Guns safely and effectively – improving production. Students will also be taught proven troubleshooting techniques, maintenance, and hands-on techniques that will save their clients repair and replacement costs.

Water Cutting

Planning and Consultation

24-Hour Support

Allstream Advantages

• LOWER COSTS THAN GRIT BLASTING

Because only water is used to remove coatings with UHP Equipment, water blasting brings labor costs down vs. grit blasting by eliminating the need to shut down for collection and disposal of abrasive. High productivity and no cleaning means you accelerate your project.

• REDUCED OVERALL PROJECT TIME

Removal of coatings with water instead of grit allows for other work to be completed during water blast operation. Steel, mechanical, electrical work, or painting can be performed simultaneously with water blasting surface preparation.

• PRODUCES A CLEANER SURFACE

PURE water is used and a cleaner surface is achieved. UHP equipment removes coatings and leaves a near white metal surface with the original profile intact. Corosion contaminants are removed from deep pits leaving your surface with a much lower level of residual chlorides vs abrasive blasting. A cleaner surface means applied coatings will last longer.

• CLEANER SURFACE

Water-soluble chlorides and other interference materials are removed which allow the new coating to last longer.

• THE ABILITY TO WORK ALONGSIDE OTHER TRADES

With water, you do not have to shut down the work area because of the sand cloud when conventional blasting. This allows the other trades to continue working which results in greater productivity. No grit in your bearings, ventilation, or other mechanical equipment.

• REDUCED CLEAN UP AND ASSOCIATED LABOR

No longer do you have to spend days cleaning up the dry dock or work area. Another significant labor reduction.

• INCREASING ENVIRONMENTAL REGULATIONS

Regulations regarding sand blasting have become more strict. As we learn more about the negative health effects of harmful metals in sand, UHP water blasting.

• DISPOSAL COSTS

Reduced waste eliminates the need for complicated procedures. Water is filtered back to tap water quality levels and can be discharged onsite.

• INCREASED WATER BLAST PRODUCTIVITY

The Stingray can blast an avg. of 4,500 sq ft per 12 hr shift, which is equivalent to 11 sand blasters. The increase comes from the new generation UHP pump, an upgraded and more powerful vacuum and a larger cutting path.

• INDUSTRY ACCEPTANCE

Many.

• CONTAINMENT

Less containment is needed when using UHP Hand Lances. The Stingray Robotic System is 100% self contained.

• WEATHER

During inclement weather, rain, UHP work can continue while grit blasting should be shut down.

• JOB FOOTPRINT

Equipment location and footprint on a jobsite can be very critical. The overall job footprint is reduced when comparing to sand blasting spreads. We have engineered our equipment to take up as little space as possible.





Allstream Equipment


All of our UHP Equipment is built to the highest standards with safety considered priority.

  • ASR Stingray Robotic System


    Description: DC Powered wireless remote controlled crawler. Vacuum assist magnetically attached, steel surface preparation robot with 18” cut path. All aluminum construction, with urethane treaded wheels, steel chain drive and all stainless hardware.

    Specifications:
    Maximum speed: 30’ per minute.
    Steering: Skid steer Zero turn radius.
    Operating pressure: up to 55,000 psi. 40,000 nominal.
    Cutting speed: 400 – 850 sqft/hour, consider all factors: pressure and flow from UHP pump, length of run, thickness of coatings, operator experience.

  • UHP Pumps


    • 10K/20K/40K/50K/55K Units Available.
    • Latest in UHP Technology.
    • Industry Leading Technology in Safety.
    • Engineered and Designed to Offshore / Petrochemical Standards.
    • Lower Parts Consumption than our competitors. Lower overall operational cost.

  • Lead Filtration System


    Allows you to filter Leaching Metals from water waste.

About Us

For years, the oil and chemical industries have relied on outdated conventional surface preparation and coating methods that stalls assets and produces burdensome waste product. We knew we could do better, so we founded Allstream. We swapped grit for water to deliver a more cost effective, efficient and environmentally friendly solution. Our our UHP pumps and Robotic Surface prep systems cut the time and cost required by traditional methods getting assets back online faster without the excessive cleanup. Allstream Services and Rental... discover the power of water.

Allstream provides UHP rental systems and UHP training certification to the surface preparation industry. We participate in the State of Louisiana's workers' enhancement grant program and are recognized as a certified trainer. Our team has over 30 years of combined experience working within the surface preparation industry by providing UHP Waterblasting systems, containment systems, and project consulting services.

Our equipment is serviced and inspected by trained technicians prior to shipment.

We provide 24/7 technical support.

Our Team

Adam Martin
Allstream President

Michael Aymond
General Manager

Allstream Affiliations

Get In Touch

For 24/7 Tech Support,
Please call Michael Aymond
985-870-2080
Michael.Aymond@GoAllstream.com
985-870-2080
Michael.Aymond@GoAllstream.com

Please Fill Required Fields
Send Message